🎵 Elevate Your Audio Game!
The MakerHawk Bluetooth Amplifier Board is a high-performance TPA3116D2 digital power amplifier that delivers 2x50W of HiFi stereo sound. With Bluetooth 5.0 for enhanced connectivity and multiple input options, it’s designed for both casual listeners and audiophiles alike. Its robust protection features ensure longevity, making it ideal for various applications from home theaters to DIY speaker projects.
F**E
Perfect for my project needs
It works as intended, no noticeable issues with audio quailty. Bluetooth connection is good and it gets much louder than you might expect from a little amp that sits in the palm of your hand. Perfect for a little project.
H**T
USB interface works surprisingly well!
Works surprisingly well! I am using a Raspberry Pi running piCorePlayer connected via USB to the amp. Perfect for in-wall speakers. The headphone connection is excellent for testing!
P**R
Works great. Low cost.
Made an excellent low cost Bluetooth speaker out of an old center channel surround speaker. Only negative is the annoying voice the says “Bluetooth mode” when powered on. A simple beep would be better.
J**T
It is small but pwerful
Okay, I got this item to add power to some speakers, and it did just that. So now the computer speakers are louder, and the volume knob is easy to use. But, you have to buy a power supply, which is more expensive then the unit. Also, no instructions. So if your now a DIYer you might have problems putting it together. Although, there is not much to doing that. All in all it is a very nice gadget. I'd give it a 4.5 stars, due to lack of a power supply, and no instructions.
V**T
Great sound in a tiny package at a tiny price
Pretty easy to put together with the provided screwdriver, even though there are no instructions. I had to look at the pictures in the Amazon listing to see how and where to put the heat sink. There a little insulating sheet that goes under the pc board, with holes where there are wires on the bottom of the pc board. The underside of the power and speaker connectors extend into and thought these openings. The screws that hold the amp together raise it just enough so that they don't touch a flat surface, but if it were set on a coin or key, for example, you might get some sparks.The sound is great. I'm running it with the 12 v supply from the 20 watt x2 amp I had, that became scratchy or noisy after 10 years or so, and volume is plenty for me, with a pair of little Yamaha NS10 speakers. It also looks nice.I'm using stranded 16 AWG wire to connect the speakers, and it's a little hard to get into the screw connectors. You have to get all the strands straight. Also they are really close together, so watch out for stray strands that could cause a short.The amp is so tiny and light I had to be careful how the speaker and power wires are arranged so they don't pull it around.
M**L
Makes sound
I highly doubt it can push the listed wattage, but it makes sound reasonably which is enough for my purposes. The Bluetooth is frustrating with no way to put it in pairing mode to block the last connected device.
R**6
SO small! Works great!
Definitely use an old computer power supply as it seems to handle and work better with higher input voltage (it can handle between 9 and 24 volts). My supply is 19V and is connected to my iPad and to two 8 Ohm speakers. Plenty loud enough.Be careful not to place it on something metal, as some of the circuit board's solders protrude through the base, slightly/ just enough to make contact. You could tape over them. I glued a base onto mine.
I**R
Not a gimmick!
Had no clue what to expect, figured it may not work since the price was so low. Boy was I wrong. This little amp has some heart. Sounds absolutely amazing! I highly recommend!!!
Trustpilot
1 month ago
1 week ago